INFLUENCE OF THE VERTICAL DISTANCE BETWEEN LOWER AND UPPER HITCH POINTS OF AN EXPERIMENTAL PLOW HITCHING DEVICE ON ITS PERFORMANCE INDICATORS

Authors

  • A.R. Rasuljonov PhD, Senior Researcher Author

Keywords:

mounted plow, hitching device, vertical distance, working depth, stability, draft resistance, energy efficiency.

Abstract

 This paper presents the results of an experimental investigation into the influence of the vertical distance between the lower and upper hitch points of an experimental plow hitching device on its performance indicators. The studies were conducted within a range of 70–90 cm, with a stepwise variation of 5 cm. During the experiments, working depth, its root mean square deviation, and the draft resistance of the plow were taken as the main evaluation criteria. The analysis of the obtained results shows that variations in the vertical distance have no significant effect on the working depth; however, noticeable changes are observed in the stability of working depth and draft resistance. The most favorable operating condition was identified in the range of 75–80 cm, where stable operation of the агрегate and minimum energy consumption were achieved. Based on the experimental results, empirical relationships were developed and optimal design parameters were justified.

References

1.McKyes, E. (1985). Soil Cutting and Tillage. Elsevier.

2.Gill, W. R., & Vanden Berg, G. E. (1968). Soil Dynamics in Tillage and Traction. USDA Agricultural Handbook.

3.Srivastava, A. K., Goering, C. E., Rohrbach, R. P., & Buckmaster, D. R. (2006). Engineering Principles of Agricultural Machines. ASABE.

4.Zelenin, A. N., Balovnev, V. I., & Kerov, I. P. (1985). Machines for Earthmoving Work.

5.ASABE Standards. Tractor Hitch Geometry and Implement Performance Guidelines. American Society of Agricultural and Biological Engineers.

Downloads

Published

2026-06-09