PREPARATION AND TENSILE STRENGTH INVESTIGATION OF POLYMER COMPOSITE GRANULES MODIFIED WITH MINERAL FILLERS
Keywords:
HDPE, LDPE, polypropylene, bentonite, kaolin, calcium carbonate, composite materials, tensile strength, mineral fillers, polymer composites.Abstract
This study investigates the tensile strength of composite materials based on HDPE 7000F, LDPE L2102TX00, PPY130, PPJ150, and PPJ160 polymers modified with mineral fillers. Bentonite, kaolin, and calcium carbonate (CaCO₃) were used as fillers at concentrations of 5, 10, and 15 wt.%. The results demonstrated that the incorporation of mineral fillers improved the tensile strength of all polymer systems. The highest tensile strength was achieved for the PPJ160-B-10 composite, reaching 43 MPa. The reinforcing efficiency of fillers increased in the order CaCO₃ < Kaolin < Bentonite. The findings indicate that bentonite-modified polypropylene composites are promising materials for construction and engineering applications.
References
1.Fu S.Y., Feng X.Q., Lauke B., Mai Y.W. Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites // Composites Part B. – 2008. – Vol. 39. – P. 933–961.
2.Ray S.S., Okamoto M. Polymer/layered silicate nanocomposites: a review from preparation to processing // Progress in Polymer Science. – 2003. – Vol. 28. – P. 1539–1641.
3.Alexandre M., Dubois P. Polymer-layered silicate nanocomposites: preparation, properties and uses // Materials Science and Engineering R. – 2000. – Vol. 28. – P. 1–63.
4.Pavlidou S., Papaspyrides C.D. A review on polymer-layered silicate nanocomposites // Progress in Polymer Science. – 2008. – Vol. 33. – P. 1119–1198.
5.Xanthos M. Functional Fillers for Plastics. – 2nd ed. – Wiley-VCH, 2010. – 512 p.
6.Rothon R. Fillers for Polymer Applications. – Springer, 2017. – 619 p.
7.Wang K., Chen L., Wu J., Toh M.L. Epoxy nanocomposites with highly exfoliated clay: mechanical properties and fracture mechanisms // Macromolecules. – 2005. – Vol. 38. – P. 788–800.