SCIENTIFIC REQUIREMENTS FOR ADSORBENTS USED IN THE PREPARATION OF SORPTION MATERIALS

Authors

  • D.J. Jumayeva Institute of General and Inorganic Chemistry, Academy of Sciences of the Republic of Uzbekistan Author
  • R.O. Akhrorova Institute of General and Inorganic Chemistry, Academy of Sciences of the Republic of Uzbekistan Author
  • N.T. Rakhmatullaeva Tashkent Institute of Chemical Technology Author
  • A.Kh. Abdurakhimov Tashkent Institute of Chemical Technology Author
  • F.M. Makhmudov Tashkent Institute of Chemical Technology Author

Keywords:

Keywords: adsorbent, adsorption materials, adsorption capacity, porous structure, micropores, mesopores, specific surface area, functional groups, adsorption selectivity, sorption technology, activated carbon, adsorption efficiency.

Abstract

Abstract. The development of high-performance adsorption materials remains one of the most important challenges in environmental protection, water treatment, gas purification, and resource recovery technologies. The efficiency of adsorption processes is largely determined by the physicochemical properties of adsorbents, including their porous structure, specific surface area, mechanical stability, chemical resistance, and surface functional groups. Therefore, establishing scientifically grounded requirements for adsorbent materials is essential for designing efficient sorption systems and improving the performance of adsorption-based technologies. This paper analyzes the fundamental requirements imposed on adsorbents used in modern sorption processes. Particular attention is given to structural parameters such as micropore and mesopore distribution, pore volume, specific surface area, adsorption capacity, selectivity, regeneration ability, thermal stability, and mechanical strength. The influence of surface chemistry and oxygen-containing functional groups on adsorption performance is also discussed. In addition, the relationships between pore structure, adsorption mechanisms, and adsorbent efficiency are examined from both physicochemical and colloid-chemical perspectives. The study demonstrates that the development of advanced sorption materials requires an integrated approach combining optimized porous architecture, surface functionality, and operational stability. The results may serve as a scientific basis for the design, selection, and application of high-performance adsorbents derived from both conventional and renewable raw materials.

References

1.Jumayeva, D.J., Abdurakhimov, A.Kh., Abdurakhimov, Kh.A., Eshmetov, I.D., & Rakhmatullaeva, N.T. (2023). Tekhnologii polucheniya adsorbentov na osnove drevesiny Pavlovniya [Technologies for producing adsorbents based on Paulownia wood]. Monograph, 170 p.

2.Jumayeva, D.J., Abdurakhimov, A.Kh., Abdurakhimov, Kh.A., Rakhmatullaeva, N.T., & Toirov, O. (2021). Energy of adsorption of an adsorbent in solving environmental problems. E3S Web of Conferences, 288, 01082. https://doi.org/10.1051/e3sconf/202128801082

3.Jumayeva, D.J., Toirov, O., Akhmedov, R., Rakhmatullaeva, N.T., & Eshmetov, I.D. (2021). Energy of adsorption of polar molecules on NaLSX zeolite. E3S Web of Conferences, 288, 01041. https://doi.org/10.1051/e3sconf/202128801041

4.Jumayeva, D.J., Rakhmatullaeva, N.T., Toirov, O.Z., Numonov, B., & Shamuratova, M. (2023). Obtaining of highly energy-efficient activated carbons based on wood. E3S Web of Conferences, 410, 01018.

5.Jumayeva, D.J., Rakhmatullaeva, N.T., Shamuratova, M.R., Bakhronov, Kh.N., & Rakhimov, U.Yu. (2022). Differential heats of adsorption of water vapor on an adsorbent obtained from wood waste. Universum: Chemistry and Biology, 9(99). https://doi.org/10.32743/UniChem.2022.99.9.1422

6.Jumayeva, D.J., Rakhmatullaeva, N.T., Shamuratova, M.R., Abdurakhimov, A.Kh., & Ergashev, O.K. (2022). Methods of activation of Paulownia wood waste. Mechanics and Technology, 3(3).

7.Jumayeva, D.J., Rakhmatullaeva, N.T., Abdurakhimov, A.A., & Babaeva, G.O. (2023). Investigation of physicochemical characteristics of wood-based adsorbents. Universum: Chemistry and Biology, 4(106). https://doi.org/10.32743/UniChem.2023.106.4.15125

8.Abdurakhimov, A.Kh., Jumayeva, D.J., Abdurakhimov, Kh.A., Rakhmatullaeva, N.T., & Eshmetov, I.D. Technology for purification of water-alcoholic solutions with wood-based adsorbents. Scientific and Technical Journal of Namangan Institute of Engineering and Technology, pp. 96–102.

9.Jumayeva, D.J., Kodirov, O.Sh., Eshmetov, I.D., Toirov, O.Z., Rakhmatullaeva, N.T., Ochilov, G.M., Shamuratova, M.R., Abdurakhimov, A.Kh., Ahrorova, R.O., & Hamroqulova, K.H. (2024). Utility Model Patent FAP 202302292/3, registered on 18 April 2024.

Downloads

Published

2026-06-09