REVIEW OF RESEARCH ON LOADING, FATIGUE DAMAGE, REMAINING SERVICE LIFE, AND TECHNICAL DIAGNOSTICS OF ELECTRIC LOCOMOTIVE AND ELECTRIC MULTIPLE-UNIT BOGIE FRAMES
Keywords:
electric locomotives, electric multiple units, bogie frames, loading conditions, fatigue damage, fatigue life assessment, remaining service life, structural integrity, technical diagnostics.Abstract
This article reviews existing research on loading conditions, fatigue damage, remaining service life, and technical diagnostics of bogie frames used in electric locomotives and electric multiple units (EMUs). Particular attention is paid to the effects of static and dynamic loads, cyclic stresses, vibration, and operational conditions on the structural integrity and fatigue resistance of bogie frames. The review examines commonly used approaches to stress analysis, fatigue life assessment, structural reliability evaluation, and residual service life prediction, including analytical calculations, finite element analysis, experimental testing, and numerical simulation. It also considers modern technical diagnostic methods, such as non-destructive testing, strain and vibration measurements, and condition monitoring, which support the detection of cracks, material degradation, and other structural defects.
References
1.Radjibayev D.O. Development of Methods for Calculating the Dynamic Strength of Locomotive Frame Structures of Complex Configuration for Transport Engineering: Abstract of a Doctor of Technical Sciences (DSc) Dissertation. Tashkent: Tashkent State Transport University, 2024. 66 pp.
2.Khromova G.A., Radjibayev D.O., Khromov S.A. Development of Methods for Calculating the Dynamic Strength of Locomotive Frame Structures of Complex Configuration for Transport Engineering. Monograph. Tashkent: Innovatsion rivojlanish nashriyot-matbaa uyi, 2020. 192 pp.
3.Khromova G., Radjibaev D. Mathematical model and algorithm for calculating the durability indicators of electric locomotive bogie elements // International Journal of Advanced Research in Science, Engineering and Technology. – 2022. – Vol. 9, No. 10. – P. 19901–19907.
4.Khromova G., Radjibaev D., Mavlyanov A. Method of calculation of dynamic strength of frame structures of locomotives of complex configuration for transport engineering // Eurasian Journal of Applied Engineering and Technology. – 2025. – Vol. 150, No. 1. – P. 9–21. DOI: 10.32523/2616-7263-2025-150-1-9-21.
5.Yusufov A., Khamidov O., Zayniddinov N., Abdurasulov S. Prediction of the stress-strain state of the bogie frames of shunting locomotives using the finite element method // E3S Web of Conferences. – 2023. – Vol. 401. – 03041. DOI: 10.1051/e3sconf/202340103041.
6.Zayniddinov N.S. Assessment of the Remaining Service Life of Diesel Locomotive Bogie Frames: Abstract of a Candidate of Technical Sciences Dissertation, 05.22.07. St. Petersburg, 2010; see also: Modelling of the Stress–Strain State of a Diesel Locomotive Bogie Frame. Izvestiya PGUPS, 2010, Issue 3(24), pp. 98–105.
7.Xiu R., Spiryagin M., Wu Q., Yang S., Liu Y. Fatigue life assessment methods for railway vehicle bogie frames // Engineering Failure Analysis. – 2020. – Vol. 116. – 104725. DOI: 10.1016/j.engfailanal.2020.104725.
8.Wang Y., Xue J., Zhang X., Chen L. Finite Element Analysis and Evaluation of Bogie Frame for Passenger Locomotive based on Reliability // International Journal of Performability Engineering. – 2019. – Vol. 15, No. 1. – P. 146–155. DOI: 10.23940/ijpe.19.01.p15.146155.
9.Lu Y., Feng Z., Chen T., Zeng J., Wu P. Finite element analysis of multi-axial fatigue strength for railway vehicle bogie frame // Journal of Beijing Jiaotong University. – 2014. – Vol. 38, No. 4. – P. 26–31, 39. DOI: 10.11860/j.issn.1673-0291.2014.04.005.
10.Ji C., Sun S., Li Q., Ren Z., Yang G. Realistic fatigue damage assessment of a high-speed train bogie frame by damage consistency load spectra based on measured field load // Measurement. – 2020. – Vol. 166. – 108164. DOI: 10.1016/j.measurement.2020.108164.
11.Yin Y., Jiang S., Li Q., Wang B., Hu H., Guo L. Research on the establishment of load spectrum for fatigue damage assessment of high-speed train bogie frame // Measurement. – 2025. – Vol. 251. – 117080. DOI: 10.1016/j.measurement.2025.117080.
12.Qu S., Wang J., Zhang D., Li D., Wei L. Failure analysis on bogie frame with fatigue cracks caused by hunting instability // Engineering Failure Analysis. – 2021. – Vol. 128. – 105584. DOI: 10.1016/j.engfailanal.2021.105584.
13.Seo J.-W., Hur H.-M., Kwon S.-J., Moon K.-H. Evaluation of fatigue crack growth behavior of bogie frames under operating load // Journal of Mechanical Science and Technology. – 2024. – Vol. 38, No. 6. – P. 2919–2929. DOI: 10.1007/s12206-024-0512-3.
14.Xiao Q., Zhang M., Chang C., Gao X. Fatigue damage assessment of bogie frame based on an improved nonlinear cumulative damage model // Scientific Reports. – 2025. – Vol. 15. – 35662. DOI: 10.1038/s41598-025-19435-3.
15.Zhang Z., Yang B., Liu J., Song Y., Li H., Yan J., Xiao S., Yang L. Multiscale investigation on fatigue crack growth and remaining useful life of bogie frame materials under service-induced damage // Railway Engineering Science. – 2026. – Vol. 34. – P. 489–512. DOI: 10.1007/s40534-025-00419-y.
16.Miki M., Ogata M. Phased array ultrasonic testing methods for welds in bogie frames of railway vehicles // Insight – Non-Destructive Testing and Condition Monitoring. – 2015. – Vol. 57, No. 7. DOI: 10.1784/insi.2015.57.7.382.
17.Makino K. Maintenance and Nondestructive Inspection of Railway Vehicles // JSME Mechanical Engineering Congress. – 2019. – P25104. DOI: 10.1299/jsmemecj.2019.P25104.
18.Makino K. Application of Phased Array Ultrasonic Testing Method to Flaw Detection in Vehicle Bogie Parts // Quarterly Report of RTRI. – 2024. – Vol. 65, No. 1. – P. 1–8. DOI: 10.2219/rtriqr.65.1_1.
19.Kim J.S., Kim N. Safety Evaluation of Bogie Frame for Tilting Railway Vehicles by Fatigue and Nondestructive Tests // Journal of the Korean Society for Railway. – 2005. – Vol. 8, No. 5. – P. 419–424.
20.Khromova G.A., Khromov S.A., Radjibayev D.O. Test Stand for Dynamic Strength Testing of Bogie Frames for Locomotives with Electric Power Transmission to Wheelsets. Republic of Uzbekistan Invention Patent No. IAP 06795. 5 February 2022, Bulletin No. 3.
21.Shin K.-h., Shin D.-h., Jeong U.-j., Kim Y.-g. Fatigue degree monitoring device of railway vehicle bogie and railroad vehicle protection method using same. Patent KR20090069471A. Korea Railroad Research Institute. – Published 01.07.2009.
22.Yamamoto S., Yagi T., Miyaji T. Assembly truck frame of rolling stock and crack detection system therefor. Patent JP2011255754A; granted as JP5357835B2. Railway Technical Research Institute. – Published 22.12.2011; grant 04.12.2013.
23.Cai G., Wang J., He M. Train component crack damage monitoring method and system. Patent EP3783356A1. Jiangsu Bide Science and Technology Co. Ltd. – Published 24.02.2021.
24.Yan J., Jin H., Sun H., Qing X. Active Monitoring of Fatigue Crack in the Weld Zone of Bogie Frames Using Ultrasonic Guided Waves // Sensors. – 2019. – Vol. 19, No. 15. – 3372. DOI: 10.3390/s19153372.