CALCULATING SPEED PROFILE AND HYDRAULIC RESISTANCE BASED ON FIXED PARAMETERS IN A SMOOTH PIPE AND TESTING IN ANSYS FLUENT
Keywords:
smooth pipe, turbulent flow, log speed profile, hydraulic resistance, iterative calculation, cavitation, ANSYS Fluent.Abstract
The article examines the mutually consistent calculation of local velocities, hydraulic resistance coefficients, and head losses when the parameters of the logarithmic velocity profile in a smooth pressure pipeline are assumed to be constant across the cross-section. Empirical expressions of the Karman parameter κ and the free term C1 depending on λ were analyzed. When converting the implicit equation determining the resistance coefficient to the Reynolds number, an algebraic inconsistency with respect to the constant term was determined, and the corresponding form was substantiated. An algorithm for the iterative determination of water discharge capacity has been developed. In the conditional example with D=1 m and Q=31.4 m3/s, the sensitivity to velocity and erosion intensity near the rim of the ring was evaluated. To fully verify the risk of cavitation, a mixture multiphase model, a Zwart–Gerber–Belamry or Schnerr–Sauer cavitation model, and a methodology for assessing local pressure and the proportion of vapor phase in ANSYS Fluent were proposed.
References
1.Nikuradse, J. (1950). Laws of flow in rough pipes. NACA Technical Memorandum 1292.
2.Prandtl, L. (1932). Zur turbulenten Strömung in Rohren und längs Platten. Ergebnisse der Aerodynamischen Versuchsanstalt zu Göttingen, 4, 18–29.
3.Colebrook, C. F. (1939). Turbulent flow in pipes, with particular reference to the transition region between the smooth and rough pipe laws. Journal of the Institution of Civil Engineers, 11, 133–156.
4.Moody, L. F. (1944). Friction factors for pipe flow. Transactions of the ASME, 66, 671–684.
5.Haaland, S. E. (1983). Simple and explicit formulas for the friction factor in turbulent pipe flow. Journal of Fluids Engineering, 105(1), 89–90. https://doi.org/10.1115/1.3240948
6.Bailey, S. C. C., Vallikivi, M., Hultmark, M., & Smits, A. J. (2014). Estimating the value of von Kármán’s constant in turbulent pipe flow. Journal of Fluid Mechanics, 749, 79–98. https://doi.org/10.1017/jfm.2014.208
7.Pope, S. B. (2000). Turbulent Flows. Cambridge University Press.
8.Schlichting, H., & Gersten, K. (2017). Boundary-Layer Theory (9th ed.). Springer.
9.White, F. M. (2016). Fluid Mechanics (8th ed.). McGraw-Hill Education.
10.Franc, J. P., & Michel, J. M. (2004). Fundamentals of Cavitation. Kluwer Academic Publishers.
11.Brennen, C. E. (1995). Cavitation and Bubble Dynamics. Oxford University Press.
12.ANSYS, Inc. (2026). Ansys Fluent Theory Guide: Cavitation Models.
13.ANSYS, Inc. (2025). Ansys Fluent User’s Guide: Steps for Using a Multiphase Model.
14.Zwart, P. J., Gerber, A. G., & Belamri, T. (2004). A two-phase flow model for predicting cavitation dynamics. International Conference on Multiphase Flow.
15.Schnerr, G. H., & Sauer, J. (2001). Physical and numerical modeling of unsteady cavitation dynamics. Fourth International Conference on Multiphase Flow.
Downloads
Published
Versions
- 2026-10-14 (2)
- 2026-10-14 (1)