CHANNEL DEFORMATION CAUSED BY THE INITIAL FLOW AT A CHANNEL BEND

Authors

  • A.N. Isakov, Karshi State Technical University, Associate Professor Author
  • Z.X. Sherboyev Assistants Author

Keywords:

Deformed channel, Secondary flow circulation, Sediment transport models, Numerical schemes used, Channel planform, Discharge, Particle size.

Abstract

 At present, the approach to determining equilibrium channel topography is based on the works of Struiksma, Shimizu and Itakura, Nelson and Smith, and others. The flow field is first calculated for the initial (new) channel (in many studies, this is obtained using a steady-state hydrodynamic model) and is then provided as input data to the sediment transport model. This model calculates the erosion–accretion zones that develop under the influence of the flow over a specified short time interval, Δt.

References

1.Ciracy, C. On Secondary Flows. Proceedings of the International Association of Hydraulic Research (IAHR) Conference, September 1967, Fort Collins, Colorado.

2.Einstein, H.A., Harder, J.A. Velocity Distribution and Boundary Layer in Channel Bends. Transactions of the American Geophysical Union, 35 (1954): 114–120.

3.Francis, J.R.D., Asfari, A.F. Velocity Distribution in Wide Curved Open Channels. Hydraulic Research, 9 (1971): 73–90.

4.Friedkin, J.F. Laboratory Investigation of Meandering in Alluvial Rivers. U.S. Waterways Experiment Station, Vicksburg (1945).

5.Godfrey, R.G. Evaluation of Current Meters. U.S. Geological Survey, Research Seminar (1958).

6.Eshev, S., Isakov, A., Abdurakhmonov, A., Sherboev, Z., Yuldosheva, U., & Ramiz, A. (2025, June). Calculation of the geometric characteristics of the washing funnel. In AIP Conference Proceedings (Vol. 3286, No. 1, p. 040037). AIP Publishing LLC.

7.Duskulov, A., Isakov, A., & Jalilov, Z. (2020, July). Selection of the number of teeth of the sprockets of the soil seeder. In IOP Conference Series: Materials Science and Engineering (Vol. 883, No. 1, p. 012141). IOP Publishing.

Downloads

Published

2026-10-09