DETERMINATION OF THE PHYSICOCHEMICAL AND MECHANICAL PROPERTIES OF JERUSALEM ARTICHOKE TUBERS AFTER DRYING

Authors

  • Beshimov Murodjon Xamidjonovich, Barakayev Nusratilla Rajabovich Bukhara State Technical University image/svg+xml Author

Keywords:

Jerusalem artichoke, Helianthus tuberosus L., drying, physicochemical properties, mechanical properties, moisture content, shrinkage, hardness, texture.

Abstract

 Jerusalem artichoke (Helianthus tuberosus L.) is an important tuber crop with considerable nutritional and technological potential due to its high carbohydrate content, particularly inulin, as well as its dietary fiber, minerals, and biologically active compounds. Drying is one of the most important preservation methods used to extend the shelf life of tubers and facilitate their subsequent processing into flour, powder, extracts, and functional food ingredients. However, the drying process causes changes in moisture content, water activity, color, shrinkage, texture, density, and mechanical strength, which may influence the quality and processing behavior of the dried product. This article examines the physicochemical and mechanical properties of Jerusalem artichoke tubers after drying. The study methodology includes determination of moisture content, water activity, soluble solids, color characteristics, bulk and true density, shrinkage, rehydration capacity, and mechanical properties such as hardness, compression strength, and deformation. The analysis of the literature indicates that drying generally decreases moisture content and water activity while increasing the relative concentration of dry matter and often causing structural collapse and shrinkage. Changes in mechanical behavior depend strongly on drying temperature, drying rate, and final moisture content. Understanding these changes is essential for optimizing drying conditions and obtaining a stable product with desirable technological properties.

References

1.Kays, S. J., & Nottingham, S. F. (2008). Biology and Chemistry of Jerusalem Artichoke: Helianthus tuberosus L. CRC Press.

2.Roberfroid, M. B. (2005). Introducing inulin-type fructans. British Journal of Nutrition, 93(S1), S13–S25.

3.Franck, A. (2002). Technological functionality of inulin and oligofructose. British Journal of Nutrition, 87(S2), S287–S291.

4.Van Loo, J., Coussement, P., de Leenheer, L., Hoebregs, H., & Smits, G. (1995). On the presence of inulin and oligofructose as natural ingredients in the Western diet. Critical Reviews in Food Science and Nutrition, 35(6), 525–552.

5.Maskan, M. (2001). Kinetics of colour change of kiwifruits during hot air and microwave drying. Journal of Food Engineering, 48(2), 169–175.

6.Mayor, L., & Sereno, A. M. (2004). Modelling shrinkage during convective drying of food materials: A review. Journal of Food Engineering, 61(3), 373–386.

7.Sablani, S. S. (2006). Drying of fruits and vegetables: Retention of nutritional/functional quality. Drying Technology, 24(2), 123–135.

8.Lewicki, P. P. (1998). Some remarks on rehydration of dried foods. Journal of Food Engineering, 36(1), 81–87.

9.Krokida, M. K., Karathanos, V. T., Maroulis, Z. B., & Marinos-Kouris, D. (2003). Drying kinetics of some vegetables. Journal of Food Engineering, 59(4), 391–403.

10.Fellows, P. J. (2017). Food Processing Technology: Principles and Practice (4th ed.). Woodhead Publishing.

Downloads

Published

2026-09-09