DEVELOPMENT OF HETEROCOMPOSITE POLYMER MATERIAL COMPOSITIONS TO INCREASE THE SERVICE LIFE OF COTTON GINNING EQUIPMENT PARTS
Keywords:
wear-resistant thermoset material, coating, fiber, drum peg, mechanical strength, tribological properties, morphological analysis, filler, reinforcing agent, part.Abstract
Today in mechanical engineering, due to the high demand for large-scale technological equipment made from composite materials for various operational conditions, special attention is being paid to its modernization by improving production techniques and technologies, as well as to the application of energy- and resource-saving methods for obtaining high-quality cotton fiber.
This article provides an analysis of modern materials used in the production of loosening drum pegs during the cleaning of cotton fibers from fine impurities in the cotton industry, as well as the work carried out to date on measures to improve the designs of these parts. Also, in order to reduce the friction of the loosening drum peg with cotton fibers and prevent damage to cotton fibers, it is proposed to coat the surface of the drum with new composite multifunctional polymer materials based on reactoplast, as well as pegs with cast parts.
References
1.U.A. Ziyamukhamedova, L.Y. Bakirov, M.A. Nurdinov, "Selection and Substantiation of Binders and Fillers for Polyfunctional Heterocomposite Polymer Materials Used in Mechanical Engineering" Oriental renaissance: Innovative, educational, natural and social sciences 1.4 (2021): 768-772.
2.T.L. Kholikov "Improving the Operational Strategy for the Production of Export-Oriented Products of Cotton-Textile Clusters Using a Balanced Scorecard System" Scientific journal of applied and medical sciences 3.5 (2024): 546-551.
3.Ziyamuhamedova, U.A., Bakirov, L.Y., & Jalolova, Z.X. (2023). Research into the physical and mechanical properties of parts made from polymer composite materials used in mechanical engineering. *Новости образования: исследование в XXI веке* [News of Education: Research in the 21st Century], *1* (8), 404-410.
4.Begatov, J., Sobirov, B., Yakubova, M., Kuchkarova, D., & Djalilova, M. (2022). The properties of high-speed steel P6M5 depending on the combined chemical-heat treatment. *International Journal of Mechatronics and Applied Mechanics*, (11), 119-122.
5.Daliev, Sh.L., & Djuraev, A.Dj. (2017). Optimization of the parameters of a peg drum with elastic elements for cleaning cotton of fine impurities. *ToshDTU Habarlari* [TashSTU News], (2), 115-120.
6.Daliev, Sh.L., Dzhuraev, A.Zh., & Bobomatov, A.Kh. (2016). Full-factorial experimental studies of a cotton cleaner with a mesh surface and elastic supports for fine impurities. In *Поколение будущего: Взгляд молодых ученых: Сборник научных статей 5-й Международной молодежной научной конференции* [The Future Generation: The View of Young Scientists: Collection of scientific articles of the 5th International Youth Scientific Conference] (pp. 299-302). Kursk.
7.Ziyamukhamedova, U., Bakirov, L., Donaev, S., Miradullaeva, G., & Turgunaliev, E. (2023). Study of structure formation processes in matrices of mixed components with reinforcing natural fillers. In *E3S Web of Conferences* (Vol. 401, p. 05074). EDP Sciences.
8.Ziyamukhamedova, U.A., & Shaymardanov, B.A. (2012). Mechanical and chemical methods of modification in developing new composite materials based on an epoxy binder and natural minerals. *Bashkirian Chemical Journal*, *19* (2), 53-57.
9.Z.Kh. Jalolova, U.A. Ziyamuhamedova. "Investigation of the mechanical properties of hybrid-structured heterocomposite polymer materials and coatings using local raw materials and energy resources." Eurasian Journal of Academic Research 4.7S (2024): 979-981.
10.O'zDSt 1056:2014 "Primary Enriched Kaolin." Recommended technical grades for kaolin application according to the Technical Specifications.
11.GOST 27326-87. Parts and products made of wood and wood-based materials. Method for determining the hardness of protective and decorative coatings by scratching.