DETERMINATION OF OPTIMAL PARAMETERS FOR THE TECHNOLOGY OF PRODUCING ANISOTROPIC STRUCTURED FILTERS WITH HIGH PERFORMANCE CHARACTERISTICS UNDER CENTRIFUGAL FORCE BASED ON MATHEMATICAL PLANNING
Keywords:
Mathematical planning, centrifugal force, anisotropic structure, cylindrical filter, BrOF10-1 bronze powder, sintering regime, interparticle contact, porosity, permeability coefficient, efficiency parameter, mechanical strength.Abstract
The article determines the optimal technological regimes for obtaining cylindrical filters with an anisotropic structure possessing high performance and mechanical characteristics from BrOF10-1 bronze powders under the action of centrifugal force using the mathematical planning method. In the study, a comprehensive analysis was conducted on the influence of key factors—such as the relative sizes of powder fractions (), container rotation speed (), conical hopper movement speed (), and sample thickness ()—on the filter performance indicators. Based on mathematical modeling and experimental trials, the porous structure was optimized, and the required sintering temperature and time were established. Applying the developed optimal regimes reduced the sintering duration by 3 hours and increased the efficiency parameter () and flexural mechanical strength () of the filters by 2 times.
References
1.Negmatov S.S., Pilinevich L.P., Karshiev M., Yunusov N.S., Sattarov A.A., Yunusalieva K.I., Rakhimov M.Yu. Theoretical description of the deposition process of spherical composite metal powders into a porous blank under vibration // Composite Materials. — Tashkent, 2020. — No. 1. — Pp. 111–116.
2.Rakhimov M.Yu., Abdusattorov D., Karshiev M., Negmatov S.S., Sattarov A.A., Yunusov N.S., Salimova S.A., Yunusalieva K.I., Fayzieva N., Ruzmatova G. Technological process for manufacturing porous permeable material (PPM) allowing to obtain products with increased permeability and mechanical strength values for a given pore size // Composite Materials. — Tashkent, 2020. — No. 4. — Pp. 105–108.
3.Sattarov A., Yunusalieva K.I., Karshiev M., Begatov Zh.M., Etmishev A.A. Regeneration of filters made of bronze metal powders for drinking water purification by ultrasound method // Composite Materials. — Tashkent, 2023. — No. 1. — Pp. 190–194.
4.Sadovnichaya I., Khoroshenkova E. Mathematical Analysis. — Moscow, 2018. — Pp. 149–151.
5.Brodsky V.Z. et al. Tables of Experimental Plans for Factorial and Polynomial Models. — Moscow: Metallurgiya, 2002. — Pp. 77–91.
6.Seber G.A.F. Linear Regression Analysis. — Moscow: Mir, 2000. — Pp. 356–388.
7.Yunusalieva K.I., Karshiev M. Creation of highly efficient PPM with anisotropic pore structure by the method of layer-by-layer filling of metal powder into a mold // Universum: Technical Sciences. — 2024. — Vol. 8(125). — Pp. 11–15.
8.Yunusalieva K.I., Karshiev M., Negmatov S.S. Study of properties of PPM obtained by introducing small particles into a porous blank under vibration // Proc. Rep. Sci.-Tech. Conf. "Progressive technologies for obtaining composite materials based on local and secondary raw materials". — Tashkent, September 14–15, 2023. — Pp. 152–154.
9.Seber G.A.F. Linear Regression Analysis. — Moscow: Mir, 2000. — Pp. 320–342.
10.Sadovnichaya I., Khoroshenkova E. Mathematical Analysis. — Moscow, 2018. — Pp. 136–141.
11.Kostornov A.G. Parameters of the porous structure of permeable materials. I. Theoretical premises and model studies // Powder Metallurgy. — 1978. — No. 4. — Pp. 34–40.