DEVELOPMENT OF A TECHNOLOGY FOR OBTAINING CYLINDRICAL FILTERS WITH AN ANISOTROPIC STRUCTURE AND HIGH OPERATIONAL PROPERTIES UNDER THE INFLUENCE OF CENTRIFUGAL FORCE

Authors

  • Fayziev M.M. Academy of the Ministry of Internal Affairs of the Republic of Uzbekistan Author

Keywords:

centrifugal force, powder metallurgy, anisotropic structure, cylindrical filter, high operational property, bronze powder, porosity, permeability coefficient, mechanical strength, cleaning indicator.

Abstract

This article investigates the technology of producing cylindrical filters with an anisotropic structure and high operational properties under the influence of centrifugal force. According to the research results, it is established that the method of forming multi-layer filtering elements from metal powders of various sizes has a higher efficiency compared to other traditional methods. Experiments have confirmed that the permeability coefficient, mechanical strength, and efficiency parameter of the filters obtained by the new method increased 2-fold, and the cleaning indicator improved to 1–3 µm. In addition, it is reported that the ability to retain solid particles in the air has increased 3-fold, successfully extending the filter's service life to 8–10 years and reducing the technological process time by 3 hours.

References

1. Vityaz P.A. Classification and ways of obtaining sintered permeable materials with an improved complex of properties // Progressive technological processes in powder metallurgy. - Moscow: Vysshaya Shkola, 1982. - pp. 107-114.

2.Karshiev M. Development of a technology for manufacturing porous powder materials (PPM) with an anisotropic pore structure using the powder metallurgy method and its introduction into industry // Journal “Kompozitsionnye Materialy” (Composite Materials), No. 2, Tashkent - 2022. - pp. 186-188.

3.Karshiev M., Negmatov S.S., Sattarov A., Abdusattorov D.N., Yunusov N.S., Mukhtorov S.A. Technology for obtaining filter elements for oil purification in internal combustion engines (ICE) by the powder metallurgy method. Tashkent - 2021. - pp. 167-169.

Downloads

Published

2026-07-21