DETERMINATION OF OPTIMAL SINTERING REGIMES IN THE PRODUCTION OF CYLINDRICAL FILTERS WITH AN ANISOTROPIC STRUCTURE AND HIGH OPERATIONAL PROPERTIES FROM BrOF-10-1 BRONZE POWDERS UNDER THE INFLUENCE OF CENTRIFUGAL FORCE

Authors

  • Fayziev M.M. Academy of the Ministry of Internal Affairs of the Republic of Uzbekistan Author

Keywords:

bronze powder, BrOF-10-1, sintering, temperature, sintering neck, contact neck, anisotropic structure, operational property, centrifugal force, mathematical planning, porosity, permeability.

Abstract

This article investigates the technology of producing cylindrical filters with an anisotropic structure and high operational properties from BrOF-10-1 bronze powders under the influence of centrifugal force. Technological problems in the simultaneous sintering of powder fractions of various sizes are analyzed, and a method is proposed for adding phosphorus to the chemical composition in a specific mass fraction corresponding to the powder size. This ensures the optimal value of the interparticle contact (sintering neck) (F = 0.15–0.20) at a temperature of 800–810 °C. The optimal process regimes were determined using mathematical planning, and the properties of the filters obtained by the new method were compared with those produced by traditional methods.

References

1.Vityaz P.A. Classification and ways of obtaining sintered permeable materials with an improved complex of properties // Progressive technological processes in powder metallurgy. - M: Vyssh. shkola, 1982. - pp. 107-114.

2.Mazyuk V.V., Pilinevich L.P., Savich V.V., Tumilovich M.V. Porous powder materials with an anisotropic structure: production methods. - Minsk: Topik, 2005. - pp. 16-34.

3.Karshiev M., Sattarov A.A., Mukhtorov S.A., Yunusov N., Yunusalieva K.I. Sintering of filter elements from various granulometric and chemical compositions of BROF-10-1 bronze powder // Republican scientific-practical conference on "Current problems of chemistry". TKHTI, Tashkent, 2021. - pp. 201-202.

4.Karshiev M., Sattarov A.A., Rakhimov M.Yu., Mukhtorov S.A., Abdisattorov D.N. Calculation of Changes in the Hydraulic and Mechanical Properties of PPM During Repeated Deposition of a Porous Billet from a Gas-Dust Air Flow Using Vibration // Journal of Optoelectronics Laser, 41 (6), 813–823. URL: http://www.gdzjg.org/index.php/JOL/article/view/620.

Downloads

Published

2026-07-21