TECHNOLOGY FOR PRODUCING A FLOCCULATING-STABILIZING REAGENT FOR WATER PURIFICATION BASED ON AMPHOTERIC CARBOXYMETHYL CHITOSAN

Authors

  • Khalilov Shuhrat Uralovich, Yusupov Anvar Rakhimovich Tashkent Institute of Chemical Technology, Tashkent, Uzbekistan Author
  • Ashirova Gulzada Shabdanbekovna Termez State University, independent researcher, Termez, Uzbekistan Author

Keywords:

amphoteric carboxymethyl chitosan, cationic group, flocculant, turbidity removal, charge neutralization, bridging mechanism, water treatment, biopolymer.

Abstract

 This paper studies the technology of obtaining amphoteric carboxymethyl chitosan (ACC), soluble over a wide pH range, by carboxymethylation of chitosan and introduction of a cationic group, and its application as a flocculating and stabilizing reagent for turbidity removal from natural waters. The coexistence of anionic (–COO⁻) and cationic (–NH₃⁺ / quaternary ammonium) groups provides neutralization of negatively charged colloidal particles and interparticle bridging. The relationship between the degree of substitution, solubility, charge density of the reagent and turbidity removal efficiency was evaluated by jar tests; the structure was confirmed by FT-IR spectroscopy. As a natural, non-toxic and biodegradable reagent, ACC is an alternative to synthetic polyacrylamide-based flocculants.

References

1.Application of chitosan and its derivatives (dialdehyde and carboxymethyl chitosan) as bioflocculants for iron and turbidity removal from filter backwash water // Water (MDPI). 2023. Vol. 15, № 16. Article 2913. DOI: 10.3390/w15162913.

2.Design of amphoteric chitosan flocculants for phosphate and turbidity removal in wastewater // Carbohydrate Polymers. 2018. [jild/sahifa va DOI nashr boʻyicha tasdiqlansin]

3.Cationic content effects of biodegradable amphoteric chitosan-based flocculants (CMC-CTA) on the flocculation properties // [jurnal va jild nashr boʻyicha tasdiqlansin]. 2013.

4.Synthesis, characterization and sludge dewaterability evaluation of the chitosan-based flocculant CCPAD // Polymers (MDPI). 2019. Vol. 11, № 1. Article 95. DOI: 10.3390/polym11010095.

5.UV-initiated synthesis of a novel chitosan-based flocculant with high flocculation efficiency for algal removal // Science of the Total Environment. 2017. Vol. 609. P. 530–539. [DOI tekshirilsin]

6.Chitosan-based materials for clean water by flocculation: a mini review // Water, Air, & Soil Pollution. 2025. DOI: 10.1007/s11270-025-08823-0.

7.Turbidity reduction in drinking water by coagulation-flocculation with chitosan polymers // Journal of Water and Health. 2019. Vol. 17, № 2. P. 204–218. DOI: 10.2166/wh.2019.relevant. [sahifa/DOI tasdiqlansin]

8.Abreu F.R., Campana-Filho S.P. Preparation and characterization of carboxymethylchitosan // Polímeros: Ciência e Tecnologia. 2005. Vol. 15, № 2. P. 79–83. DOI: 10.1590/S0104-14282005000200004.

9.Rashidova S.Sh., Milusheva R.Yu. Xitin va xitozan Bombyx mori: sintez, xossalari va qoʻllanilishi. Toshkent: Fan, 2009. (Oʻzbekiston FA Polimerlar kimyosi va fizikasi instituti)

10.Vokhidova N.R., Mamasoliyev U.M., Yugay S.M., Rashidova S.Sh. Synthesis and study of the structure of N-succinyl chitosan Bombyx mori and their biological applications // Polymer Bulletin. 2023. DOI: 10.1007/s00289-023-04680-1.

11.Milusheva R.Yu., Rashidova S.Sh. Bombyx mori chitosan nanoparticles: synthesis and properties // Open Journal of Organic Polymer Materials. 2019. Vol. 9, № 4. P. 63–73. DOI: 10.4236/ojopm.2019.94004.

Downloads

Published

2026-07-10