DESIGN AND STRUCTURAL ANALYSIS OF A POLYMER COMPOSITE FUEL TANK FOR AUTOMOTIVE WEIGHT REDUCTION
Keywords:
composite polymers, HDPE, fuel tank design, ANSYS, lightweight structures, automotive engineering, fuel efficiency.Abstract
The rapid development of the automotive industry has led to increased demand for lightweight, energy-efficient, and environmentally friendly vehicle components. This study investigates the application of composite polymer materials, particularly high-density polyethylene (HDPE), in the design of automotive fuel tanks as an alternative to conventional steel structures. The main objective of the research is to evaluate the structural, mechanical, and economic performance of polymer-based fuel tanks compared to traditional metallic systems.
The methodology of the study is based on analytical calculations, computer-aided design (CAD), and finite element analysis (FEA) using ANSYS software. Comparative simulations were conducted under identical boundary conditions to assess stress distribution, deformation behavior, weight reduction, and volumetric efficiency.
The results indicate that the HDPE fuel tank demonstrates a significant weight reduction of approximately 72–80%, lower von Mises stress values, and improved structural uniformity compared to steel tanks. In addition, fuel storage capacity increased from 35 liters to 45 liters due to optimized geometric design. Economic analysis shows that the proposed system reduces annual fuel costs and provides a payback period of approximately 20 months.
The findings confirm that polymer composite materials can effectively replace conventional metals in selected automotive components, contributing to improved fuel efficiency, reduced emissions, and enhanced sustainability in transport systems.
References
1.Ashby, M. F. (2011). Materials Selection in Mechanical Design (4th ed.). Butterworth-Heinemann, Oxford, UK.
2.Callister, W. D., & Rethwisch, D. G. (2018). Materials Science and Engineering: An Introduction (10th ed.). Wiley, New York, USA.
3.Friedrich, K., & Almajid, A. A. (2013). “Manufacturing aspects of advanced polymer composites for automotive applications.” Applied Composite Materials, 20(2), 107–128. https://doi.org/10.1007/s10443-012-9257-5
4.European Commission (2020). Lightweight Materials in Automotive Engineering: Environmental Impact Report. Brussels, Belgium.
5.Osswald, T. A., & Menges, G. (2012). Materials Science of Polymers for Engineers. Hanser Publishers, Munich, Germany.
6.Zhang, Y., Li, X., & Wang, H. (2019). “Mechanical behavior of HDPE-based composite structures under pressure loading.” Polymer Testing, 76, 1–10. https://doi.org/10.1016/j.polymertesting.2019.01.012
7.Shigley, J. E., Budynas, R. G., & Nisbett, J. K. (2014). Mechanical Engineering Design (10th ed.). McGraw-Hill Education, New York, USA.
8.ASTM International (2021). ASTM D638: Standard Test Method for Tensile Properties of Plastics. West Conshohocken, PA, USA.
9.European Environment Agency (2021). CO₂ Emissions from Road Transport in Europe. Copenhagen, Denmark.
10.OECD (2020). Transport Strategies for Sustainable Development. Organisation for Economic Co-operation and Development, Paris.
11.Rao, S. S. (2017). The Finite Element Method in Engineering. Elsevier, Oxford, UK.