DEVELOPMENT OF AN AUTOMATION AND INTELLIGENT CONTROL SYSTEM FOR THE POLYVINYL CHLORIDE DRYING PROCESS
Keywords:
polyvinyl chloride, PVC drying, fluidized bed, pneumatic dryer, automation, model predictive control, fuzzy logic, soft sensor, intelligent control.Abstract
Drying is one of the most energy-intensive and quality-sensitive operations in suspension polyvinyl chloride (S-PVC) production. The process is characterized by nonlinear heat- and mass-transfer dynamics, long transport delays, changes in feed moisture, grade-dependent particle properties, and strict limits on final resin moisture and thermal exposure. This paper proposes a hierarchical automation and intelligent-control architecture for PVC drying that combines conventional regulatory control with online moisture estimation, model-predictive optimization, fuzzy supervisory logic, and data-driven soft sensing. The proposed system is organized around a pneumatic pre-drying stage and a fluidized-bed finishing stage, although the same principles can be adapted to single-stage units. Key controlled variables are outlet moisture, bed/material temperature, pressure drop and energy demand, while manipulated variables include thermal duty, drying-air flow, feed rate and residence time. Literature on PVC drying shows that inlet air temperature is a dominant operating factor and that pneumatic pre-drying can substantially reduce energy use. Evidence from advanced industrial drying control further supports the use of MPC, fuzzy control and neural-network models for disturbance rejection and moisture stabilization. The resulting concept is intended to improve product consistency, reduce over-drying, lower specific energy consumption and provide a practical basis for implementation in a PLC/DCS-SCADA environment.
References
1. Aubin, A., Ansart, R., Hemati, M., Lasuye, T., & Branly, M. (2014). Modeling and simulation of drying operations in PVC powder production line: Experimental and theoretical study of drying kinetics on particle scale. Powder Technology, 255, 120–133. https://doi.org/10.1016/j.powtec.2013.08.019
2. Banooni, S., Hajidavalloo, E., & Dorfeshan, M. (2018). Experimental and numerical study of the effects of pre-drying of S-PVC using a pneumatic dryer. Powder Technology, 338, 220–232. https://doi.org/10.1016/j.powtec.2018.06.027
3. Mujumdar, A. S. (Ed.). (2014). Handbook of Industrial Drying (4th ed.). CRC Press.
4. Jamaleddine, T. J., & Ray, M. B. (2010). Application of computational fluid dynamics for simulation of drying processes: A review. Drying Technology, 28(2), 120–154. https://doi.org/10.1080/07373930903517458
5. Cristea, V. M., Baldea, M., & Agachi, S. P. (2000). Model predictive control of an industrial dryer. Computer Aided Chemical Engineering, 8, 271–276. https://doi.org/10.1016/S1570-7946(00)80047-4
6. Pirrello, L., Yliniemi, L., Leiviskä, K., & Galluzzo, M. (2002). Self-tuning fuzzy control of a rotary dryer. IFAC Proceedings Volumes, 35(1), 125–130. https://doi.org/10.3182/20020721-6-ES-1901.01172
7. Han, F., Zuo, C., Wu, W., Li, J., & Liu, Z. (2012). Model predictive control of the grain drying process. Mathematical Problems in Engineering, 2012, 584376. https://doi.org/10.1155/2012/584376
8. Zhang, Y., Fang, Z., Li, C., & Li, C. (2024). Deep-learning-based model predictive control of an industrial-scale multistate counter-flow paddy drying process. Foods, 13(1), 43. https://doi.org/10.3390/foods13010043